PLG series disc continuous dryer technical characteristics (a) dry plate ◎ design pressure: generally 0.4MPa, up to 1.6MPa. ◎ maximum operating pressure: How much money is generally ≤0.4MPa disc dryer up to 1.6MPa. ◎ Heating medium: steam, hot water, oil, dry plate temperature using 100 ℃, hot water heating, 100 ℃ ~ 150 ℃ when ≤0.4MPa saturated with water vapor or superheated steam heating, 150 ℃ ~ 320 ℃ when conducting oil heating tray dryer works,> 320 ℃ when use electric, oil, etc. heated molten salt. Disc advantages of continuous drying equipment material less damage due to the drying process, the material in the drying tray is pushed or driven slow rakes, abrasion between which the material particles to each other is very small, so the particle shape before and after drying the material substantially does not occur change, breakage rate is very low, especially not affect the surface quality of the crystal material. Material is heated evenly. Due to the drying process the material in a dry pan along the Archimedean spiral trajectory forward tumble dryer Which disc, dry materials are moving away five times the radius of the disc tray dryer, whereabouts and layer by layer, thus heating the disk material contact the same time, the heat very evenly. Disc tray dryer performance _ _ and dryer are dry, high yield and are provided by Changzhou Drying Equipment Co., Ltd .. Changzhou and now Drying Equipment Co., Ltd. (www.hzdrying.com) strong, credible, in Changzhou, Jiangsu drying equipment industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement and innovative ideas are dry and will lead you hand into the brilliant, for a better future!