PLG series disc continuous dryer technical characteristics (a) dry plate ◎ design pressure: generally 0.4MPa, up to 1.6MPa. ◎ maximum operating pressure: general ≤0.4MPa, up to 1.6MPa. ◎ Heating medium: steam, hot water, oil, dry plate temperature using 100 ℃, hot water heating, 100 ℃ ~ 150 ℃ when ≤0.4MPa saturated with water vapor or superheated steam heating, 150 ℃ ~ 320 ℃ when conducting oil How much heating tray drying equipment cost,> 320 ℃ can be electric when, oil, molten salt, etc. heated. Disc continuous drying equipment advantages of high thermal efficiency. Disc continuous dryer for drying heat transfer by conduction, only leads to a very small amount (or unreasonable in) air disc drying equipment selection of recommended dryer drying process, the exhaust carry a very small disc drying equipment, so the thermal efficiency of up to 65%. Low power consumption, low noise due to the drying process, the material layer is thin, low spindle speed, material transport system needed to build small power disc drying equipment, small power consumption, its complete drying device power consumption is only convection heat transfer device power consumption of 1/5 ~ 1/7, and very little noise. How the quality of the disc drying equipment, disc drying equipment, and are dry and are provided by Changzhou Drying Equipment Co., Ltd. Changzhou and now Drying Equipment Co., Ltd. (www.hzdrying.com) strong, credible, in Changzhou, Jiangsu drying equipment industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement and innovative ideas are dry and will lead you hand into the brilliant, for a better future!