PLG series disc continuous dryer technical characteristics (a) dry plate ◎ design pressure: generally 0.4MPa, up to 1.6MPa. ◎ maximum operating pressure: general ≤0.4MPa, up to 1.6MPa. ◎ Heating medium: steam, hot water, oil, dry plate temperature using 100 ℃, hot water heating, 100 ℃ ~ 150 ℃ when ≤0.4MPa saturated with water vapor or superheated steam heating, 150 ℃ ~ 320 ℃ when conducting oil heating,> 320 ℃ when use electric, oil, etc. heated molten salt. Disc continuous small advantage in material losses drying equipment, good environmental protection. Since during drying tray dryer configuration, the material progress under a tray dryer drying capacity, but also the distribution of material on a wet dry tray dryer, and dry exhaust gas flow rate is very low (about 0.1m / s), and therefore the material dust is difficult to float to the top of the device, but will not be entrained in the exhaust gas discharged, not only the loss of material, and does not pollute the environment. Simple structure, small footprint tray dryer structure, easy to operate. Due to the amount of exhaust gas exiting the dryer drying process is very small, and almost dust-free material, and therefore do not need to configure an area of ??large, complex operations dedusting equipment tray dryer | drying quality and are selling (certified) | disc dryers are provided by Changzhou and Drying Equipment Co., Ltd .. Changzhou and now Drying Equipment Co., Ltd. (www.hzdrying.com) is an industry leader in Changzhou, Jiangsu, drying equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In dry leadership and positive staff warmly welcome all inquiries to discuss, create and are drying a better future.